Campbell T4900524 Cold Shut, 5/16 in

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to...

Campbell T9600635 Anchor Shackle, 3/8 in, 1000 lb, Steel Pin, Carbon Steel Body, Zinc Plated

WARNING: Use shackles only as indicated. Shackles must be inspected for wear, distortion and damage before use. If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace...

Campbell Extra Flexible Pre-Cut Cable, 5/16 in Dia x 200 ft L, Steel, Galvanized

Applications: garage doors, winches, tie downs. Good strength. Good flexibility. NOTE: NOT TO BE USED IN AIRCRAFT CONTROLS.nullnullCABLE7 x 19 CONSTRUCTIONElectro-Galvanized - 200' ReelTrade Size...

Rope Clamp Zinc 2 Pcs 1/2in

Rope Clamp Zinc 2 Pcs 1/2in

Cambell T7670459 Wire Rope Clip, 3/8 in, Malleable Iron

Do Not use on coated cable; if used on coated cable, remove coating from assembly area.nullnullWIRE ROPE CLIPSMALLEABLE IRON - GALVANIZEDUPC Tagged BulkCable Size Ins.=3/8

Campbell PS0332027 Straight Coil Chain, 2/0, 60 ft L, 520 lb, Low Carbon Steel

Use for tailgates barrier guards, animal ties. Low carbon steel; not heat treated. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting...

Campbell 7000227 Flexible Aircraft Cable, 1/8 in Dia x 500 ft L, 96 lb

WARNING: Do Not Exceed Working Load Limit.nullnullCABLEHIGH-STRENGTH - GALVANIZEDFLEXIBLE 7 x 7 CONSTRUCTIONUncoated - 500' ReelSize In=1/8WLL lb=96

Campbell 0722957 Passing Link Chain, 2/0, 50 ft L, 450 lb, Low Carbon Steel

For general utility, farm and animal applications. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or...

Chain Deco No10 Brsnic 40ft Rl

Use for hanging plants and lamps, drapery tie-backs. WARNING: Do not use for overhead lifting.nullnullDECORATOR CHAIN40' Length - Trade Size #10Finish=Br NickelWLL lb=35

Campbell T4900824 Cold Shut, 1/2 in

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to...

WELDED RING NICKEL 1-1/4

WELDED RING NICKEL 1-1/4

Slip Hook Clevis Zn Gr43 5/16

WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.nullnullSLIP...