SENCO AX13EAA Brad Nail, 1 in L, 18 Gauge, Steel, Electro-Galvanized, Medium Head, Smooth Shank

Galvanized, smooth shank. Applications such as molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails and picture frames.

ProFIT 0081155 Stockade Staple, 6 Gauge, Galvanized Steel

Size of 6 ga. Use to fasten stockade panels to wood posts.

Stinger 0135175 Cap Nail, 3 in L, Flat Head, 12 ga Gauge, Plastic

Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe.Deformed ring shank for greater holding powerDeformed...

DeWALT DW16S2-25GAL Crown Staple, 1 in W Crown, 3/4 in L Leg, 16 ga Gauge, Galvanized

DeWALT Crown Staple, Crown Width: 1 in, Leg Length: 3/4 in, Point Type: Chisel, Material Gauge: 16 ga, Collation Type: Glue, Galvanized

DeWALT DWRHS8DR113G Framing Nail, 2-3/8 in L, Galvanized Steel, Full Round Head, Ring Shank

DeWALT Framing Nail, Collation Type: Plastic Strip, Collation Angle: 21 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.113 in Dia, 2-3/8 in L, Galvanized Steel, Suitable for: Power Nailer

ORGILL BULK NAILS 00059132 Finishing Nail, 6D, 2 in L, Steel, Galvanized, Brad Head, Round Shank, 50 lb Package

Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim and are used to set door and window frames, apply trim and in other...

ProFIT 0069055 Hand Drive Roofing Nail, 1 in L, Flat Head, 11 ga Gauge, Steel

ProFIT Hand Drive Roofing Nail, Head Size: 7/16 in, Head Type: Flat, Shank Type: Round, Smooth, Point Type: Diamond, 1 in L, Material Gauge: 11 ga, Steel, Galvanized, Approximate Nails per Pound: 254, Package Weight: 5 lbLarge flat head for greater...

ProFIT 0093142 Square Cut Nail, 7D, 2-1/4 in L, Carbon Steel, Brite, Rectangular Head, Tapered Shank, 50 lb Package

Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to...

Stinger 0127092 Cap Nail, 1-1/2 in L, Flat Head, 12 ga Gauge, Steel

1 in head. Preferred nail for securing paper, house wrap materials, poly or foam.

MAZE STORMGUARD TH4491050 Hand Drive Barn Nail, 16D, 3-1/2 in L, Steel, Galvanized, Ring Shank, 50 lb Package

Double hot-dipped galvanized after threading and hardening. Recommended for the application of skirt boards and other components treated with the new corrosive wood preservatives.

ORGILL BULK NAILS 0069092 Hand Driven Roofing Nail, 1-1/2 in L, 11 ga, Flat Head, 50.85 lb Package

Use for asphalt shingles.Large flat head for greater holding powerLarge flat head for greater holding powerHeavy gauge, round, smooth shank provides greater resistance to bending

ORGILL BULK NAILS 0165202 Deck Nail, 4 in L, 7 ga, Flat Head, 50.85 lb Package

Use for exterior deck and railing. Meets ASTMA-153.Thin, mechanically deformed spiral shank helps reduce splitting without bendingThin, mechanically deformed spiral shank helps reduce splitting without bending