Genova 34505 Riser Extension, 1/2 in FIP X 1/2 in MIP, SCH 40

Used to extend sprinkler risers. May be used in initial installation or for replacement purposes. PTFE thread tape is recommended for threaded joints.nullnullPVC FITTINGSSPRINKLER RISER EXTENDERSFIP...

Genova 30716 Pipe Reducing Elbow, 90 deg, 1 x 1/2 in, Slip, SCH 40, PVC

Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466.nullnullPVC FITTINGSREDUCING 90 DEGREE ELBOW - SLIP X SLIPFOR SCHEDULE 40 PIPESize In=1 x 1/2

Genova 82315 Trap Adapter, For Use With Solvent Welds Over 1-1/2 in Drain, Waste and Vent Pipes, ABS

Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.nullnullABS-DWV FITTINGSFITTING...

Genova 71659 Fitting Cleanout Body, 6 in, Spigot X FIP, PVC

Solvent welds into fitting hub and adapts to male threaded plug. Component part of Fitting Cleanout with Threaded Plug. Teflon thread tape is recommended for threaded joints.nullnullPVC-DWV...

Genova 72966 DWV Sanitary Pipe Street Elbow, 90 deg, 6 in, Hub x Spigot, SCH 40, PVC

Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend.nullnullPVC-DWV FITTINGS90 DEGREE SANITARY STREET ELBOWHUB X SPIGOT - SCHEDULE 40Size In=6

Genova 361415 Hose Tee Without Clamps, 1-1/2 in, Insert, Nylon

Used to provide a branch supply line from a main line.nullnullINSERT FITTINGSNYLON - TEE WITHOUT CLAMPSINSERT X INSERT X INSERTSize In=1-1/2

Genova 73440 Double DWV Pipe Wye, 4 in, Hub, SCH 40, PVC

Used to bring two branch lines into a horizontal drain pipe in drain-waste-vent applications.nullnullPVC-DWV FITTINGSDOUBLE WYE - ALL HUBSCHEDULE 40Size In=4

Genova 82840 DWV Sanitary Pipe Elbow, 90 deg, 4 in, Hub, SCH 40, ABS

Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.nullnullABS-DWV FITTINGS90 DEGREE SANITARY...

Genova 400 Pipe Elbow, 22.5 deg, 6 in, Hub, PVC

Used to change direction in piping for sewer lines, septic tank and seepage systems. Sometimes called a sixteenth bend. 3" meets ASTM D2949 or exceeds ASTM D2729.nullnullPVC SEWER & DRAIN...

Genova 351415 Hose Tee, 1-1/2 in, Insert, Polypropylene

Used to provide a branch supply line from a main line.nullnullINSERT FITTINGSPOLYPROPYLENE - TEE WITHOUT CLAMPSINSERT X INSERT X INSERTSize In=1-1/2

Genova 70143 DWV Pipe Reducing Coupling, 4 x 3 in, Hub, SCH 40

Used in drain-waste-vent applications to reduce or increase pipe sizes.nullnullPVC-DWV FITTINGSREDUCING COUPLINGS - HUB X HUBSCHEDULE 40Size In=4 x 3

Genova 30717 Pipe Reducing Elbow, 90 deg, 1 x 3/4 in, Slip, SCH 40, PVC

Used to change direction in piping. Fitting reduces to smaller pipe size. Conforms to ASTM D2466.nullnullPVC FITTINGSREDUCING 90 DEGREE ELBOW - SLIP X SLIPFOR SCHEDULE 40 PIPESize In=1 x 3/4

Genova 300 Solvent Weld Pipe Reducing Bushing, 2 X 1-1/4 in, MIP X FIP, PVC, White

Inserts into threaded fitting socket to reduce to smaller threaded opening. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466. Boxed.nullnull

Genova 82215 Trap Adapter, For Use With Solvent Welds Over 1-1/2 in Drain, Waste and Vent Pipes, ABS

Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.nullnullABS-DWV...

Genova 35457 Pipe Tee, 3/4 in, FIP, SCH 40, PVC

Adapts to male threaded main line to provide a threaded branch line of the same size. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2466.nullnullPVC FITTINGSFEMALE TEE -...

Genova 80132 DWV Pipe Reducing Coupling, 3 x 2 in, Hub, SCH 40

Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.nullnullABS-DWV FITTINGSREDUCING COUPLING - HUB X HUBSCHEDULE 40Size In=3 x...