Worldwide Sourcing Pipe Cross, 3/4 In, Malleable Iron, Galvanized

Flat banded, right hand threads.nullnullGALVANIZED PIPE FITTINGSMALLEABLE CROSSSize In=3/4

EPC 30630 Tube Cap, 3/4 in, Sweat/Solder, Wrot Copper

EPC 30630 Tube Cap, 3/4 in, Sweat/Solder, Wrot Copper

Genova 41840 Cleanout Plug, 4 in, MIP, Cold Water Only, PVC, White

Used to form a removable closure for sewer lines, septic tank and seepage systems. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2852.nullnullSTYRENE SEWER & DRAIN FITTINGSPLUG - M.I.P.Size In=4

Worldwide Sourcing Pipe Street Elbow, 90 Deg, 3/4 In, Threaded, Malleable Iron

Worldwide Sourcing Pipe Street Elbow, 90 Deg, 3/4 In, Threaded, Malleable Iron

Worldwide Sourcing Standard Pipe Nipple, 3/4 In, Threaded, 1-1/2 In L, Steel, Galvanized

Right hand threads.nullnullGALVANIZED PIPE NIPPLESSTANDARDSize In=3/4 x 1-1/2

Worldwide Sourcing Standard Pipe Nipple, 3/4 In, Threaded, 3 In L, Steel, Galvanized

Right hand threads.nullnullGALVANIZED PIPE NIPPLESSTANDARDSize In=3/4 x 3

Genova 40153/S Pipe Cap, 3 in, Hub, PVC, White

Used to permanently or temporarily cap pipe. Meets ASTM D2852.nullnullSTYRENE SEWER & DRAIN FITTINGSCAP - HUBSize In=3

B & K 103-003 Hose Bibb, 3/4 in MPT Inlet, 3/4 in Male Hose Thread Outlet, 125 psi, Brass

3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7nullnullHOSE BIBBSBRASSMPT X GHTMPT\In=3/4PSI=125

Genova 31481 Solvent Weld Pipe Reducing Tee, 3/4 x 3/4 x 1/2 in, Slip x Slip x FIP, SCH 40, PVC

Solvent welds into main line to provide a threaded branch line of reduced size. Teflon tape is recommended for threaded joints. Conforms to ASTM D2466.nullnull

Trap Adapter Fem Hubxslp 1-1/2

Utilized to adapt PVC pipe to tubular traps at wall or floor. Special washer seals to either 1-1/2" or 1-1/4" tubular products. This fitting solvent welds over an 1-1/2" DWV pipe.nullnullPVC-DWV FITTINGSTRAP ADAPTER - HUB X SLIP JAM NUTSCHEDULE 40Size...

Genova 81121 DWV Sanitary Pipe Reducing Tee, 2 x 2 x 1-1/2 in, Hub, SCH 40, ABS

Use when connecting a reducing branch line into a vertical drain pipe. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.nullnullABS-DWV FITTINGSREDUCING SANITARY TEE - ALL HUBSCHEDULE 40Size In=2 x 2 x 1-1/2

B&K 108-904RP Backflow Preventer Vacuum Breaker, 3/4 in, MPT, Brass

Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with...