Raco 8768 Mud-Ring Raised Square Electrical Box Cover, 4 in L x 4 in W x 5/8 in T, Gray, Steel

Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed.nullnullSQUARE BOX COVERSRAISED - SINGLE DEVICE - STEELRise In=5/8

Cover Box Rec Sq Stl 5inx1/2in

Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2". For one 30-50 amp, single receptacle 2.141" diameter. 10.3 cubic inch capacity. UL Listed.nullnull

Box Octagon Stl Ts 4in 15.5cu

Drawn metal 4" octagon box used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. Maximum recommended support load for a static...

Ring Extension Stl 4in 22.5cu

For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2" side knockouts, drawn metal, suitable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep, 22.5 cubic...

Raco 560 Gangable Switch Box, 1 Gang, 14 cu-in x 3 in L x 2 in W x 2-3/4 in D

For conduit. 3" x 2" switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14.0 cubic inch capacity, 2-3/4" deep, four 1/2" side knockouts, two 1/2" bottom...

Raco 871 Wall Plate, 2 Gang, 4 in L x 4 in W, Gray, Galvanized

Two device switch box cover. Made from unpainted, pregalvanized steel. Used with 2 toggle 2 gang switch boxes. UL 514-A Listed, File E195978 / CSA Listed, File LR-1082.nullnullSWITCH BOX COVERSMETAL

Cover Box Sq Stl 1dup/1gfi 4in

For one GFCI receptacle and one duplex receptacle. 6.5 cubic inch capacity. UL Listed, CSA Listed.nullnullSQUARE BOX COVERSSURFACE - STEELSize In=4

Box Utility Steel Weld 16.5 Cu

For convenience outlets, switch boxes or small junction boxes for exposed work applications. 4" x 2", with four 3/4" conduit knockouts (sides), two 3/4" conduit knockouts (bottom) and two 3/4"...

Raco 8196 Electrical Box, 1 Gang, 21 cu-in x 4 in L x 4 in W x 1-1/2 in D

Six 1/2" and 3 TKO conduit knockouts (sides). Three 1/2" and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mudring/cover installation. FM bracket mounts flat on...

Switchbx Stl 4 X 2-1/8in Flush

Installed flush in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical...

Box Fan/fixt Stl Octgn New 4in

Ceiling fan box, 4" octagon, 1 bottom 1/2" TKO knockout. 2-1/8" depth, 22.3 cubic inches. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be...

Support Box Elec Metal Indoor

Use two to mount switch box with plaster ears to hollow wall. Slips between box and wall, tabs bend inside box.nullnullELECTRICAL BOX SUPPORTSMETAL

Ring Ext Octgn Stl 4in 15.5 Cu

Two 1/2" and two 3/4" conduit knockouts (sides). Extension rings provide a means for adding additional cubic capacity or as and outlet box for surface conduit.nullnullSTEEL OCTAGON BOXES4 INCH -...

Switchbox Steel 3-1/2in W/ears

Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic cable clamps in each end. 3" x 2" x 3-1/2"...

Box Outlet Steel 4-11/16in Sq

Conduit wiring system. Two 1/2" and twelve TKO conduit knockouts (sides). One 1/2", three TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or...

Cover Box Sq Stl Blank 4-11/16

Rugged construction, used to close an outlet box. Key hole mounting feature allows for installation of cover without removing box screws. 4-11/16" square. UL Listed.nullnullSQUARE BOX COVERSFLAT...